@article{Krsmanović Whiffen_Salernitano_Grilli_Magnani_Mazzanti_Pilloni_Montone_2020, title={ZnS wurtzite ceramic fabrication by a simple and cost‐effective pressureless sintering method: A microstructure development overview}, volume={31}, url={https://www.pagepressjournals.org/microscopie/article/view/9203}, DOI={10.4081/microscopie.2020.9203}, abstractNote={<p>The Two-Step Sintering (TSS) process is a useful method to obtain sintered materials of high density and to limit the grain growth associated with the final stage of the sintering process. One of the main advantages of this method is the lowering of the sintering temperature. The development of bulk, dense and small grain size in the wurtzite phase of the ZnS ceramic was investigated by using a micron-sized ZnS powder as a precursor material. The microstructure and morphology of the TSS-fabricated ZnS ceramic pellets were observed by Scanning Electron Microscopy (SEM) and compared to those produced by the conventional sintering process. The ZnS ceramic produced using the TSS method at 1100°C showed comparable density and a much finer microstructure (five times smaller grain size) than the ZnS ceramic produced using conventional sintering at 1250°C. It was demonstrated that the TSS process is a pressureless, simple and cost‐effective sintering method, able to deliver high density bulk, wurtzite phase ZnS ceramics with controlled grain size.  </p>}, number={2}, journal={Microscopie}, author={Krsmanović Whiffen, Radenka and Salernitano, Elena and Grilli, Selene and Magnani, Giuseppe and Mazzanti, Francesca and Pilloni, Luciano and Montone, Amelia}, year={2020}, month={Sep.} }