https://doi.org/10.4081/ejtm.2024.11701
4
0
0
0
Smart Citations4
0
0
0
Citing PublicationsSupportingMentioningContrasting
See how this article has been cited at scite.ai
scite shows how a scientific paper has been cited by providing the context of the citation, a classification describing whether it supports, mentions, or contrasts the cited claim, and a label indicating in which section the citation was made.
Effects of various disinfectants on surface roughness and color stability of thermoset and 3D-printed acrylic resin
Denture cleansers are extensively utilized to inhibit the colonization of various Candida species. Currently, additive technology in denture fabrication has become more prevalent. This study aims to assess the impact of disinfectants on the surface roughness and color stability of distinct denture bases. Disc-shaped samples (N=66) were exposed to three different disinfectants: 0.5% sodium hypochlorite, 1% hydrogen peroxide, and 2% chlorhexidine. The samples underwent evaluation via spectrophotometry and profilometry, respectively. Data analysis was conducted utilizing analysis of variance (ANOVA) (p < 0.05). Within the heat-cured group, sodium hypochlorite resulted in the most notable change in surface roughness (0.2 μm), while chlorhexidine exhibited the least impact (0.001 μm), showing a significant difference (p <0.008). The color change (ΔE) for 3D-printed samples immersed in all disinfectants was higher compared to heat-cured samples. Among the heat-cured samples, chlorhexidine induced the highest ΔE (2.76), while sodium hypochlorite resulted in the lowest (ΔE = 1.44), and this difference was statistically significant (p <0.008). Chlorhexidine caused the most significant color alteration among the solutions, while sodium hypochlorite induced the most considerable changes in surface roughness.
Kohli S, Bhatia S. Polyamides in dentistry. International Journal of Scientific Study . 2013;1(1):20-5.
Abbasi S, Nikanjam S, Shishehian A, Khazaei S, Fotovat F, Pana NH. A comparative evaluation of wear resistance of three types of artificial acrylic teeth after removing the glaze layer. Dent Res J (Isfahan). 2022 Jul 18; 19:59. PMID: 36159046; PMCID: PMC9490251.
DOI: https://doi.org/10.4103/1735-3327.351341
Campbell SD, Cooper L, Craddock H, Hyde TP, Nattress B, Pavitt SH, Seymour DW. Removable partial dentures: The clinical need for innovation. J Prosthet Dent. 2017 Sep;118(3):273-280. Epub 2017 Mar 23. PMID: 28343666.
DOI: https://doi.org/10.1016/j.prosdent.2017.01.008
Sharma A, Shashidhara H. A review: Flexible removable partial dentures. J Dent Med Sci. 2014;13(12):58-62.
DOI: https://doi.org/10.9790/0853-131265862
Leles CR, Ferreira NP, Vieira AH, Campos AC, Silva ET. Factors influencing edentulous patients' preferences for prosthodontic treatment. J Oral Rehabil. 2011 May;38(5):333-9. Epub 2010 Oct 12. PMID: 21039748.
DOI: https://doi.org/10.1111/j.1365-2842.2010.02158.x
Boucher CO. Complete denture prosthodontics--the state of the art. 1975. J Prosthet Dent. 2004 Oct;92(4):309-15. PMID: 15507901.
DOI: https://doi.org/10.1016/j.prosdent.2004.05.017
Vafaee F, Mohammadi A, Khoshhal M, Allahbakhshi H. A Comparative study of heat and self-cured acrylic resins on color stability of 5 brands of denture teeth. Avicenna Journal of Dental Research. 2015;8(1):1-5.
DOI: https://doi.org/10.17795/ajdr-30328
Alla RK, Sajjan S, Alluri VR, Ginjupalli K, Upadhya N. Influence of fiber reinforcement on the properties of denture base resins. 2013;4(1):1-7.
Moravej A, Salehi M, Salehi A, Khosravi A, Yaghmoori K, Rezvan F. Evaluation of the Flexural Strength Values of Acrylic Resin Denture Bases Reinforced with Silicon Dioxide Nanoparticles: A Systematic Review and Meta-analysis. International Journal of Scientific Research in Dental and Medical Sciences. 2023;5(1):21-6.
Tandon R, Gupta S, Agarwal SK. Denture base materials: From past to future. Indian J Dent Sci. 2010;2(2):33-9.
Fotovat F, Shishehian A, Alijani S, Alafchi B, Parchami P. Comparison of shear bond strength of orthodontic stainless-steel brackets on temporary crowns fabricated by three different methods: An in vitro study. Int Orthod. 2022 Jun;20(2):100641. Epub 2022 May 24. PMID: 35624022.
DOI: https://doi.org/10.1016/j.ortho.2022.100641
Schweiger J, Edelhoff D, Güth JF. 3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing. J Clin Med. 2021 May 7;10(9):2010. PMID: 34067212; PMCID: PMC8125828.
DOI: https://doi.org/10.3390/jcm10092010
Chen SG, Yang J, Jia YG, Lu B, Ren L. TiO2 and PEEK Reinforced 3D Printing PMMA Composite Resin for Dental Denture Base Applications. Nanomaterials (Basel). 2019 Jul 22;9(7):1049. PMID: 31336607; PMCID: PMC6669468.
DOI: https://doi.org/10.3390/nano9071049
Unalan Degirmenci B, Hayas Kakai RT, Guducuoglu H, Ozcan M. Evaluation of the effectiveness of current disinfection methods in complete denture patients. Quintessence Int. 2021 Dec 1;53(1):36-46. PMID: 34235910.
Gajwani-Jain S, Magdum D, Karagir A, Pharane P. Denture cleansers: A review. IOSR Journal of Dental and Medical Sciences. 2015;1(14):94-6.
Alam M, Jagger R, Vowles R, Moran J. Comparative stain removal properties of four commercially available denture cleaning products: an in vitro study. Int J Dent Hyg. 2011 Feb;9(1):37-42. PMID: 21226849.
DOI: https://doi.org/10.1111/j.1601-5037.2009.00432.x
Montagner H, Montagner F, Braun KO, Peres PE, Gomes BP. In vitro antifungal action of different substances over microwaved-cured acrylic resins. J Appl Oral Sci. 2009 Sep-Oct;17(5):432-5. PMID: 19936521; PMCID: PMC4327669.
DOI: https://doi.org/10.1590/S1678-77572009000500015
Wong WT, Chan WI, Liao PH, Lo KV. A hydrogen peroxide/ microwave advanced oxidation process for sewage sludge treatment. J Environ Sci Health A Tox Hazard Subst Environ Eng. 2006;41(11):2623-33. PMID: 17000550.
DOI: https://doi.org/10.1080/10934520600928086
Machado AL, Breeding LC, Vergani CE, da Cruz Perez LE. Hardness and surface roughness of reline and denture base acrylic resins after repeated disinfection procedures. J Prosthet Dent. 2009 Aug;102(2):115-22. PMID: 19643225.
DOI: https://doi.org/10.1016/S0022-3913(09)60120-7
Vojdani M, Giti R. Polyamide as a Denture Base Material: A Literature Review. J Dent (Shiraz). 2015 Mar;16(1 Suppl):1-9. PMID: 26106628; PMCID: PMC4476124.
Ragain JC. A review of color science in dentistry: Colorimetry and color space. J Dent Oral Disord Ther. 2016;4:1-5.
DOI: https://doi.org/10.15226/jdodt.2016.00148
Firouz F, Izadi A, Fotovat F, Ghorbani Gholiabad S, Nikanjam S. The effect of different solutions on optical behavior of polished and glazed zirconia-reinforced lithium silicate ceramics. Journal of Kerman University of Medical Sciences. 2018;25(5):428-40.
de Freitas Fernandes FS, Pereira-Cenci T, da Silva WJ, Filho AP, Straioto FG, Del Bel Cury AA. Efficacy of denture cleansers on Candida spp. biofilm formed on polyamide and polymethyl methacrylate resins. J Prosthet Dent. 2011 Jan;105(1):51-8. PMID: 21194588.
DOI: https://doi.org/10.1016/S0022-3913(10)60192-8
Porwal A, Khandelwal M, Punia V, Sharma V. Effect of denture cleansers on color stability, surface roughness, and hardness of different denture base resins. J Indian Prosthodont Soc. 2017 Jan-Mar;17(1):61-67. PMID: 28216847; PMCID: PMC5308072.
DOI: https://doi.org/10.4103/0972-4052.197940
Nikanjam S, Abbasi S, Khazaei S. Effect of different bleaching methods on optical behaviors of CAD/CAM ceramics. Avicenna Journal of Dental Research. 2021;13(4):113-8.
DOI: https://doi.org/10.34172/ajdr.2021.22
Chung YJ, Park JM, Kim TH, Ahn JS, Cha HS, Lee JH. 3D Printing of Resin Material for Denture Artificial Teeth: Chipping and Indirect Tensile Fracture Resistance. Materials (Basel). 2018 Sep 21;11(10):1798. PMID: 30248955; PMCID: PMC6213768.
DOI: https://doi.org/10.3390/ma11101798
Wilson T, Nair VV, Karunakaran H, Ravichandran R, Viswambharan P, Rajeev SL. Evaluation of Tensile Bond Strength of Zinc Containing and Zinc Free Denture Adhesives on Different Denture Base Resin Materials: An in Vitro Study. International Journal of Scientific Research in Dental and Medical Sciences. 2023;5(3):117-26.
Carvalho CF, Vanderlei AD, Marocho SM, Pereira SM, Nogueira L, Paes-Júnior TJ. Effect of disinfectant solutions on a denture base acrylic resin. Acta Odontol Latinoam. 2012;25(3):255-60. PMID: 23798071.
Srinivasan M, Kamnoedboon P, McKenna G, Angst L, Schimmel M, Özcan M, Müller F. CAD-CAM removable complete dentures: A systematic review and meta-analysis of trueness of fit, biocompatibility, mechanical properties, surface characteristics, color stability, time-cost analysis, clinical and patient-reported outcomes. J Dent. 2021 Oct;113:103777. Epub 2021 Aug 13. PMID: 34400250.
DOI: https://doi.org/10.1016/j.jdent.2021.103777
Gruber S, Kamnoedboon P, Özcan M, Srinivasan M. CAD/CAM Complete Denture Resins: An In Vitro Evaluation of Color Stability. J Prosthodont. 2021 Jun;30(5):430-439. Epub 2020 Sep 9. PMID: 32864812.
DOI: https://doi.org/10.1111/jopr.13246
Alqanas SS, Alfuhaid RA, Alghamdi SF, Al-Qarni FD, Gad MM. Effect of denture cleansers on the surface properties and color stability of 3D printed denture base materials. J Dent. 2022 May;120:104089. Epub 2022 Mar 8. PMID: 35271942.
DOI: https://doi.org/10.1016/j.jdent.2022.104089
Jain S, Sayed M, Ahmed WM, Halawi AHA, Najmi NMA, Aggarwal A, et al. An in-vitro study to evaluate the effect of denture cleansing agents on color stability of denture bases fabricated using CAD/CAM milling, 3D-printing and conventional techniques. Coatings. 2021;11(8):962.
DOI: https://doi.org/10.3390/coatings11080962
azzetti G, Burgess JO, Gardiner D, Ripps A. Color stability of fluoride-containing restorative materials. Oper Dent. 2000 Nov-Dec;25(6):520-5. PMID: 11203865.
Hersek N, Canay S, Uzun G, Yildiz F. Color stability of denture base acrylic resins in three food colorants. J Prosthet Dent. 1999 Apr;81(4):375-9. PMID: 10095204.
DOI: https://doi.org/10.1016/S0022-3913(99)80001-8
Kessler A, Reichl FX, Folwaczny M, Högg C. Monomer release from surgical guide resins manufactured with different 3D printing devices. Dent Mater. 2020 Nov;36(11):1486-1492. Epub 2020 Sep 21. PMID: 32972769.
DOI: https://doi.org/10.1016/j.dental.2020.09.002
Rocha MM, Carvalho AM, Coimbra FCT, Arruda CNF, Oliveira VC, Macedo AP, Silva-Lovato CH, Pagnano VO, Paranhos HFO. Complete denture hygiene solutions: antibiofilm activity and effects on physical and mechanical properties of acrylic resin. J Appl Oral Sci. 2021 Sep 3;29:e20200948. PMID: 34495105; PMCID: PMC8425897.
DOI: https://doi.org/10.1590/1678-7757-2020-0948
Gad MM, Abualsaud R, Fouda SM, Rahoma A, Al-Thobity AM, Khan SQ, Akhtar S, Al-Abidi KS, Ali MS, Al-Harbi FA. Color Stability and Surface Properties of PMMA/ZrO2 Nanocomposite Denture Base Material after Using Denture Cleanser. Int J Biomater. 2021 Apr 7;2021:6668577. PMID: 33927766; PMCID: PMC8049834.
DOI: https://doi.org/10.1155/2021/6668577
Ozyilmaz OY, Kara O, Akin C. Evaluation of various denture cleansers on color stability and surface topography of polyetherketoneketone, polyamide, and polymethylmethacrylate. Microsc Res Tech. 2021 Jan;84(1):3-11. Epub 2020 Aug 5. PMID: 32757255.
DOI: https://doi.org/10.1002/jemt.23558
How to Cite
Fotovat, F., Abbasi, S., Nikanjam, S., Alafchi, B., & Baghiat, M. (2024). Effects of various disinfectants on surface roughness and color stability of thermoset and 3D-printed acrylic resin. European Journal of Translational Myology, 34(1). https://doi.org/10.4081/ejtm.2024.11701
Copyright (c) 2024 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.