Risks associated with laser radiation reflections in a healthcare environment: a surface reflectance study in the range 250 nm – 25 μm

Submitted: 11 July 2024
Accepted: 17 July 2024
Published: 25 July 2024
Abstract Views: 0
PDf: 0
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.

Authors

Biomedical applications relying on optical radiation, particularly with the advent of lasers, have experienced exponential growth in the last 20 years. Powerful optical sources are now found not only in universities, hospitals, and industries but also in beauty centers, used for tasks such as tattoo removal, and even in our homes. Despite their widespread use, managing the risks associated with lasers, particularly in non-research contexts, has not kept pace with their proliferation. While the risks associated with direct exposure to radiation to the eye and skin are relatively well understood, the hazards posed by reflected and diffuse radiation remain less characterized and monitored. Therefore, there is a critical need to assess potential eye and skin hazards in spaces where lasers and non-coherent light sources are used. This necessitates a detailed analysis of reflective surfaces, with particular emphasis on evaluating their reflectance characteristics at relevant wavelength ranges. This study investigates the reflectance and transmittance (where relevant) properties of commonly used materials in biomedical settings, including fabrics, plastics, and metals, across a broad spectrum from 250 nm (UVA) to visible light and into the infrared (IR) region up to 25 μm. Both specular (at 45° incidence) and diffuse reflectance spectra were measured using spectrophotometric techniques and used to provide a straightforward parameter to classify the specular/diffusive behavior of the different surfaces. Besides, small-angle reflectance measurements in the IR range were performed by Fourier transform infrared spectrometry. The knowledge of the material optical properties used in environments where optical radiation is employed allows for accurate assessment of associated risks. This facilitates the determination of appropriate preventive measures and the establishment of safer protocols, for both operators and, where applicable, patients and the general public. For this scope, the creation of a database of material reflective properties has been initiated.

Dimensions

Altmetric

PlumX Metrics

Downloads

Download data is not yet available.

Citations

Barat K. Laser Safety: Tools and Training. 2nd ed. London (UK): Taylor & Francis Ltd, 2017.
Directive 2006/25/EC of the European Parliament and of the Council of 5 April 2006 on the minimum health and safety requirements regarding the exposure of workers to risks arising from physical agents (artificial optical radiation) (19th individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC). Non-binding guide to good practice for implementing Directive 2006/25/EC 'Artificial optical radiation. Publication Office of EU (2011) ISBN 978-92-79-16046-2 doi:10.2767/742018.
International Commission on Non-Ionizing Radiation Protection (ICNIRP). ICNIRP Guidelines on Limits of Exposure to Laser Radiation of Wavelengths between 180 nm and 1,000 μm. Health Phys. 2013 Sep;105(3):271-295.
European Normative: EN 60601-2-22. Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment.
Niemz MH. Laser-tissue interactions: fundamentals and applications. Springer. 2019.
Insero G, Fusi F, Romano G. The safe use of lasers in biomedicine: Principles of laser-matter interaction. J Public Health Res 2023;12:22799036231187077
Cimmino MC, Biondi M, Guasti A, et al. Laser interaction with medical textiles: changes of optical properties and damage thresholds. Physica Medica: Eur J Med Physics 2023;115:102884.
Romano G, Insero G, Marrugat SN, Fusi F. Innovative light sources for phototherapy. Biomol Concepts 2022;13:256-71.
Vo-Dinh T (ed). Biomedical Photonics Handbook. Boca Raton: CRC Press, 2003.
Vo-Dinh T (ed). Biomedical Photonics Handbook: Therapeutics and Advanced Biophotonics. 2nd ed. Boca Raton: CRC Press, 2014.
ISO 21920-2:2021, Geometrical product specifications (GPS) — Surface texture: Profile

Supporting Agencies

The research activity reported in this manuscript has been performed in the framework of the regional project “Suppression of Airborne Viral Epidemic Spread by Ultraviolet light barriers (SAVES-US)” and the project “Endoscopio luminoso per il trattamento dell'Helicobacter pylori (EndoLight)”, POR FESR 2014-2020. These research projects are funded by Tuscany Region.

How to Cite

Insero, G., Mercatelli, L., Cimmino, C., Donato, R. G., Romano, G., Fusi, F., & Guasti, A. (2024). Risks associated with laser radiation reflections in a healthcare environment: a surface reflectance study in the range 250 nm – 25 μm . Healthcare in Low-Resource Settings. https://doi.org/10.4081/hls.2024.12802